
Ali & Sons Marine Engineering walk in interview in Abu Dhabi is taking place on Saturday, 21 November 2026 from 8:00 AM to 2:00 PM GST (9:00 AM to 3:00 PM PKT) at Plot 354 MR2, Mussafah, ICAD 2, Abu Dhabi, and this page brings together everything a candidate needs before attending: the roles open, the requirements, the documents to bring, and how the walk-in interview works on the day. Ali & Sons Marine Engineering Factory is hiring for 7 roles — Forklift Operator, Light Vehicle Driver, Auto Electrician, Heavy Equipment Mechanic, Diesel Engine Mechanic, Structural Fabricator and Pipe Fabricator — and candidates attend in person at the venue with their CV and documents. There is no online application for this drive: you turn up, you are interviewed, and the hiring team decides on the spot or shortly after. No salary figure is stated in the source notice for any of these roles, so none is given here. Pay is confirmed by Ali & Sons during the hiring process.
Walk-in Details
The Ali & Sons Marine Engineering walk in interview in Abu Dhabi is a one-day open interview, and the details below are taken from the source notice. Candidates should plan to arrive early, because walk-in interviews are handled in the order candidates arrive and the hiring team can only see a limited number of people in the stated hours.
- Date: Saturday, 21 November 2026
- Time: 8:00 AM to 2:00 PM GST (9:00 AM to 3:00 PM PKT)
- Venue: Plot 354 MR2, Mussafah, ICAD 2, Abu Dhabi
- Company: Ali & Sons Marine Engineering Factory
- Roles open: 7 — Forklift Operator, Light Vehicle Driver, Auto Electrician, Heavy Equipment Mechanic, Diesel Engine Mechanic, Structural Fabricator and Pipe Fabricator
A free shuttle service is arranged for candidates: pick-up from Shabiya 12 Bus Station, Abu Dhabi, at 8:30 AM and 11:00 AM, with return trips at 2:00 PM and 4:00 PM. For enquiries the notice gives +971 54 305 7909 and +971 56 549 5226.
Roles Available
Ali & Sons Marine Engineering Factory is hiring for the following 7 roles at this walk-in interview. Read the list carefully and attend for the role that matches your hands-on experience, because the hiring team will check your background against the trade you apply for.
- Forklift Operator: forklift operation in the Plant, Machinery and Vehicles division.
- Light Vehicle Driver: light vehicle driving duties.
- Auto Electrician: vehicle electrical repair and maintenance.
- Heavy Equipment Mechanic: heavy equipment repair and maintenance.
- Diesel Engine Mechanic: diesel engine repair and maintenance.
- Structural Fabricator: structural steel fabrication in the Oil and Gas division.
- Pipe Fabricator: pipe fabrication in the Oil and Gas division.
No salary figure is stated in the source notice for any of these roles, so none is given here. Pay is confirmed by Ali & Sons during the hiring process.
Requirements and Documents to Bring
Walk-in interviews move fast, so candidates who arrive with the right documents get seen first and get a proper hearing. The source notice sets the following requirements for this drive, and applicants should check them honestly against their own background before travelling to the venue.
- Experience in the same trade, with immediate joining preferred.
- An updated CV.
- A passport copy.
- Relevant certificates.
- Your own full personal protective equipment (PPE), which candidates must bring and wear for the on-site practical assessment.
Bring originals where you have them, plus clear photocopies, so the hiring team can verify your documents on the spot. Keep your CV short and focused on the trade you are applying for, with your most recent work first and a working phone number at the top. If you hold trade certificates or a driving licence relevant to the role, bring those too, even if the notice does not list them.
About Ali & Sons Marine Engineering
Ali & Sons Marine Engineering Factory is part of Ali & Sons Holding, a diversified business group based in Abu Dhabi. The factory supports offshore and marine and oil and gas work through its Plant, Machinery and Vehicles division and its Oil and Gas division. This walk-in interview hires skilled tradespeople for both divisions, and the practical assessment on the day means experienced hands are judged on what they can do, not only on paper.
Candidates who do well at walk-in interviews are usually the ones who know something about the employer before they arrive. Read about Ali & Sons Marine Engineering Factory before the day, know which role you want, and be ready to explain your recent work in that trade in plain terms. The hiring team meets many candidates in a few hours, so a clear, honest account of your experience stands out more than a long CV.
How to Attend
Attending the Ali & Sons Marine Engineering walk in interview in Abu Dhabi is straightforward: there is no appointment and no online form. Travel to Plot 354 MR2, Mussafah, ICAD 2, Abu Dhabi on Saturday, 21 November 2026 and arrive during the interview hours, 8:00 AM to 2:00 PM GST. Aim to reach the venue at least thirty minutes before the time you want to be seen, because queues form early at popular walk-in interviews and the team works through candidates in arrival order.
At the venue, report to the recruitment desk with your CV and documents. You will usually be registered, your documents checked, and then interviewed by a member of the hiring team. Some trades involve a short practical check or a discussion of your past site work, so be ready to talk through real jobs you have done. If you are selected, the team will explain the next steps before you leave.
What to Expect on the Day
Expect a busy venue and a practical process. Walk-in interviews are not formal panel interviews: the hiring team works through a queue of candidates, checks documents, and holds short interviews focused on experience and availability. Dress in clean work-ready clothes, bring water, and allow enough time for waiting, because the process can take a couple of hours even when your own interview is short.
Answer questions directly and give real examples from your work. If you are asked about a trade task, describe how you did it, on what kind of site, and for how long. If you are asked when you can start, give an honest answer: immediate joiners are preferred at this drive, and the hiring team plans around the start dates candidates give on the day.
Why Attend
First, a walk-in interview removes the wait of an online application: you meet the hiring team face to face on Saturday, 21 November 2026 and get an answer far faster than a CV sent into a portal. Second, Ali & Sons Marine Engineering Factory is hiring for 7 roles at once, so candidates with the right trade experience have a genuine chance rather than competing for a single opening. Third, the roles are full-time positions with an established UAE employer, which means steady work rather than a one-off assignment.
There is also no fee to attend. Ali & Sons Marine Engineering Factory does not charge candidates for an application, an interview or an offer, and no agent or middleman is involved in this hiring. Never pay anyone who asks for money for a job, an interview or a visa in connection with this drive.
Frequently Asked Questions
When and where is the Ali & Sons Marine Engineering walk in interview in Abu Dhabi?
On Saturday, 21 November 2026, from 8:00 AM to 2:00 PM GST (9:00 AM to 3:00 PM PKT), at Plot 354 MR2, Mussafah, ICAD 2, Abu Dhabi.
Which roles are open?
7 roles: Forklift Operator, Light Vehicle Driver, Auto Electrician, Heavy Equipment Mechanic, Diesel Engine Mechanic, Structural Fabricator and Pipe Fabricator.
Do I need an appointment?
No. This is an open walk-in interview. Attend in person at the venue during the stated hours with your CV and documents.
What documents should I bring?
An updated CV, a passport copy, a visa copy and relevant certificates or experience documents. Check the Requirements and Documents to Bring section above for the full list for this drive.
Is there a salary stated for these roles?
No salary figure is stated in the source notice for any of these roles, so none is given here. Pay is confirmed by Ali & Sons during the hiring process.
Is there a fee to attend?
No. Attendance is free, and Ali & Sons Marine Engineering Factory never charges candidates a fee to apply, attend an interview or receive an offer. Never pay anyone who asks for a fee.
Also visit our other websites: EuroDaily — News and Guidance, Every Day | IndeedOne — Jobs and Information